上海如迪流体输送有限公司   My status HomeFeedback Chinese
 
HOME ABOUT US PRODUCTS&SOLUTIONS PROJECTS NEWS RELEASES QUALITY CERTIFICATION DOWNLOAD CONTACT US
RD

Please allow us to provide you with the best service.

Please allow us to provide you with the best service.

 

 
Position: RD plunger pump series
 
Prev:No
next:No
Air operated plunger pump
Where To Buy
Summary

Product Description

The pump uses reciprocating plunger to make fluid flow.lt can produce higher fluid pressure to cany a higher viscosity fluid, and can be applied to arduous work and bad working conditions, suitable for all kinds of fluid conveying, circulation and extrusion process.According to the check valve quantity and shape , it can be divided into double-ball cylinder pump.besides, in accordance with the applicable fluid viscosity range and can be divided into low viscosity, viscosity and high viscosity plunger pump.

The pump uses reciprocating plunger to make fluid flow.lt can produce higher fluid pressure to cany a higher viscosity fluid, and can be applied to arduous work and bad working conditions, suitable for all kinds of fluid conveying, circulation and extrusion process.According to the check valve quantity and shape , it can be divided into double-ball cylinder pump.besides, in accordance with the applicable fluid viscosity range and can be divided into low viscosity, viscosity and high viscosity plunger pump.

Characteristics of RD Plunger pump

1.Dealt with a 20000 centipoise fluid viscosity.
2.Various motors can be matched with the pumps of different materials,to meet different flow range and pressure range Body material is 304(316),seal materials are teflon and high molecular polymer. Adjust pump outlet flow by controlling compressed air flow or valve flow. Automatically stop when the pump outlet obstruction or dosing,avoiding the waste.
3.Using high quality pneumatic motor, long4erm forced tight gap seal and new type of mechanism design, can prolong the Iife of pump, reduce fault occurs, improve production efficiency, reduce operating costs,etc. It has a strong self-priming ability.
4.Corrosion resistant, high temperature resistant and explosion-proof.
Applications including petrochemical, printing, paint, textile, chemical industry, food, etc.
5.Working principle of RD Plunger pump
RD pneumatic plunger pump is a kind of reciprocating pump, belongs to volume pump.Plunger drive by the pump shaft, reciprocating motion, the suction and discharge valve are both check valves. Pull the plunger,the working chamber pressure is reduced, the outlet valve ball close, below inlet pressure, inlet valve ball opens, liquid into.On the contrary,liquid out.Pneumatic plunger pump is the most widely used axial plunger pump currently.the plunger drives by the shaft,and the shaft pull out or push back the plunger to finish oil absorption or discharge process.

Technicak parameter and performance indicators :

  Max.working pressure   100psi(0.8Mpa,8bar)
  Max.flow rate   18gpm(68/lpm)
  Max.suction height   5m
  Max.permitted grain   2.5mm
  Fluid outlet size   3/4in[npt(f)/bsp(f)
  Fluid inlet size   1-1/2in[npt(f)/bsp(f)
  Max.air consumption   28scfm(0.672m3/min)
  Air inlet size   1/4in.npt(f)/bsp(f)
  Connection type   (GB)
  Body materia   304、316
  Conveying fluid ratio   1.25:1
 
BROWSE OTHER PRODUCTS: MORE
Air operated plunger pump
 
 
Copyright Shanghai RuDi Fluid Conveyor Co.,Ltd. All Rights Reserved
Company Address :No.350, East Nanyanggang Road, Shanyang Town, Jinshan District,
Telephone Number :0086-21-36333536
Fax Number :0086-21-36333539
Email :rudi@shrudi.com
Website:http://www.shrudi.com
ABOUT US
Company Introduction
Product Show
Dynamic News
Quality Certification
Projects
Contact Us
CATEGORIES
RD pneumatic diaphragm pump series
RD manual diaphragm pump series
RD electric diaphragm pump series
Components of RD pneumatic diaphragm pump series
RD plunger pump series
PROJECTS